• Ista BMW + Mini software
  • Ista BMW + Mini software

ISTA+ Diagnostic software for BMW and MINI (4.28.31)


BMW + MINI Diagnostic software

Category: Tags: , , , , ,


ISTA +for  D+Can cable
2021 Ultimate Dealer level access Diagnostic, Coding, Programming software

for BMW’s and MINI’s from 1996 – Recent

No Virtual Machines ✔️
Native Installation✔️
Technical Support✔️

What can this software actually do on your car?

With this software and lead, you can do what you would normally be forced to pay a BMW dealership to do for you, but using your laptop:

DPF Regeneration
Read, identify and erase diagnostics fault codes from all modules
Auto-identify your vehicle number, chassis, ECU fitted etc.
Code / Program modules
Encode new modules
Test specific parts
Stream live data
Reset Service Light
Interrogate and reset reported airbag problems
Interrogate and reset reported ABS problems
Update vehicle software and firmware
Create BMW approved test plans for repairs, upgrades and updates
Synchronize EWS to DME
Program new ECU and upgrade functions
Reset ECU adaptations
Reset SMG / SSG functions
And much more including wiring diagrams and parts catalogues.

Laptop specification

This software will run on any laptop with a USB 2.0 / 3.0 port

Minimum 256Gb Hard Drive fitted with 100Gb of spare hard drive space

You will need a minimum of 4Gb of RAM
Software will run with Windows 7 (Pro & Ultimate Only), Windows 8 / 8.1 & Windows 10
(Windows 10 is best and recommended)

Software works on both 32 and 64-Bit versions of Windows

The package comes complete with step by step easy-to-follow VIDEO installation instructions.

What software is included in this pack:

  • BMW ISTA+ Diagnostic 4.28.31
  • (integrated Wiring Diagrams and Repair Manuals)
    (replaced old DIS v57 and INPA) used for Diagnostic of E-/ F-/ G- Series using K+DCAN Cable, ENET Cable, ICOM Interface;
  • BMW Ediabas Standard Tools
    (latest SP-Daten data for E & Mini R series coding, programming):
  • Additional Diagnostic Software and Coding, Programming tasks for E-series, Mini R-series, using K+DCan cable:

    • Ediabas 7.3.0
    • INPA 5.0.6
    • NCS Expert 4.0.1
    • NCS Dummy
    • NFS WINKFP 5.3.1
  • BMW ETK (Online Electronic Parts Catalogue)

Professionally made VIDEO Installation Guides!

Models covered by this software

All BMW Group models are covered, produced since 1996, as long as they have an oblong socket near the steering column or an under bonnet 20 pin ’round’ socket:
BMW 1 Series E81, E82, E87, E88, F20, F21, F40, F52 Including LCI Facelift
BMW 2 Series F22, F23, F44, F45, F46, F87
BMW 3 Series E30, E36, E46, E90, E91, E92, E93, F30, F31, F34, F35, F80, G20, G80 including LCI Facelift
BMW 4 Series F32, F33, F36, F82, F83, G22, G23, G24
BMW 5 Series E34, E39, E60, E61, F07, F10, F11, F18, F90, G30, G31, G38 including LCI Facelift
BMW 6 Series E63, E64, F06, F12, F13, G32
BMW 7 Series E32, E38, E65, E66, E68, F01, F02, F04, G11, G12
BMW 8 Series E31, G15
BMW i3, i8
BMW X1 – E84, F48, F49
BMW X2 – F39
BMW X3 – E83, F25, G01
BMW X4 – F26, G02
BMW X5 – E53, E70, F15, F85, G05
BMW X6 – E71, E72, F16, F86, G06
BMW X7 – G07
BMW Z1 – E30
BMW Z3 – E36
BMW Z4 – E85, E86, E89, G29
BMW Z8 – E52
MINI R50, R52, R53, R55, R56, R57, R58, R59, R60, R61, F54, F55, F56, F57, F60

(Please note my package works with Minis, some software does not).
(G -series chassis Diagnostic Only, Coding is NOT supported with this package)


What  cables do you need for these software?

K+DCAN Cable or ICOM

E and Mini R series vehicles:

ECU Data Files = SP-Daten
NCS Expert = Coding Software (SP-Daten must be installed as per guidance)
WinKFP = Programming / Flashing Software (SP-Daten must be installed as per guidance)
EDIABAS = Low Level ECU Communication Software used by BMW Standard
Tools (INPA, WinKFP, NCSexpert, ect) and ISTA

ENET Cable or ICOM

F, I, G and Mini F series vehicles:
ECU Data Files = PSdZData
E-Sys* = Coding and Programming Software (*this software is not included in the pack)
ISTA (ISTA+ Next or ISTA-d) is a Diagnostic tool for all BMW Group vehicles.


There are no reviews yet.

Be the first to review “ISTA+ Diagnostic software for BMW and MINI (4.28.31)”

Your email address will not be published. Required fields are marked *