Lexia 3 with the newest Diagbox 7.83 FULL CHIP
Dealer Lexia 3, diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does. Lexia 3 diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models.
LEXIA 3 Citroen And Peugeot Diagnostic Tool Diagbox 3 In 1 Citroen And Peugeot Tester
LEXIA 3 DIAGBOX 7.83 Interface latest version, works for both Citroen and Peugeot! Dealer diagnostic scanner is well suit for comprehensive Citroen and Peugeot cars diagnostic. You can do all as authorized dealer does. This diagnostics software allows you to perform complete diagnostics of all from 1995 until present models. Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001). This item 100% works fine. It is tested by tens of users.
Latest software version:
Diagbox V7.83 Software
Full step by step instruction for Installation and Activation.
We offer a full support and help with activation software. You will also get a free updates on CD or via email.
Interface works with both Citroen and Peugeot
Full adapter package with Lexia-3 Citroen/Peugeot Diagnostic contains 30pin old line, total 6 lines, Peugeot for querying, management function, programming and diagnosing, etc.
Supports all models of Citroen, for programming, matching, diagnosing, etc.
Latest software support testing all 2012 vehicles models, support the Peugeot 508
INCLUDE 30 PIN CABLE
ENGINE, automatic transmission, air conditioning system, SRS, ABS, ASR, MPL, GM, anti-theft system, OBD-II system, and so on.
Read fault codes, clear the fault code, dynamic data stream , computer matching program, component testing, etc. It is the maintenance of Peugeot-Citroen car best helper
Latest software version
Latest models supported by latest Diagbox 3 in 1 software
Peugeot models: 106、107、205、206、207、306、307、308、309、405、406、407、408、508、605、607、806、807、1007、3008、4007、5008、ion、HOGGAR、RCZ、BIPPER、PARTNRT、EXPERT、BOXER etc.
Citroen cars: CITROEN, Elysee,C-QUATRE, Picasso, Xsara and C-Triomphe ,AX、ZX、XM、BERLINGO、C1、C2、C3、C4、C5、C6、C8、C15、DS3、DS4、DS5, and so on.
DIAGBOX diagnosis system is Citroen and Peugeot universal of next-generation diagnosis program, it contains Diagbox, PPS, and LEXIA three sets diagnosis program, basically covers all Peugeot and Citroen models.
We offer upgrade free by email.
Windows XP, VISTA, 7, 8 is suggested for your operation system. (It must be 32bit Windows)
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
- Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc…
- Read fault codes
Displays all stored and pending fault codes with complete description (e.g. “Rail pressure – too low pressure”).
Program supports report printing or copy to clipboard.
- Clear fault codes
Clears all stored fault codes and other diagnostic information.
- Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
- Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
- Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc)
- Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
- Citroen cars including C1, C2, C3, C4, C6, C8, C-CROSSER, NEMO, BERLINGO, JUMPY, JUMPER, AX, SAXO, BX and so on. But please pay attention, according to our customer experience, this item can’t works good at C5 models.
- Most Peugeot cars from 1995
Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Peugeot Boxer III
Peugeot Boxer III minibus
Citroen Jumper III
Citroen Jumper III minibus
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98/2000/XP with the latest service pack installed.
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable
1pc x 16pin to Clip Cable
1pc x Instruction for Installation and Activation DVD for PP2000
1 pc x 30 pin code cable.
Note: Please don’t try to disassemble the machine. No warranty if the machine is disassembled!